uOLED-128-G1

          Product Details & User Guides

      List price USD $84.95 each plus shipping and handking
                     (quantity discounts available)

Description

This product replaces the µOLED-128-GMD1.

The µOLED-128-G1 is a compact and cost effective all in one ‘SMART” display module using the latest state of the art Passive Matrix OLED (PMOLED) technology with an embedded GOLDELOX graphics controller that delivers ‘stand-alone’ functionality to any project. The module is designed to operate under two different software platforms; the Serial Command platform or the 4DGL (4D Graphics Language) platform.

Serial Command Platform:
The serial command platform allows the µOLED-128-G1 module to be used as slave device connected to an external host. The host can be any controller such as a PIC, AVR, ARM, STAMP, etc. or even a PC where all screen related functions are sent using a simple protocol via the serial interface. Serial commands may comprise of a single byte or multiple bytes of data depending on the command type. The serial platform allows users to develop their application using their favourite microcontroller and software development tools.

4DGL Platform:
4DGL is a graphics oriented language allowing the developer to write applications in a high level language (syntax similar to popular languages such as BASIC, C, Pascal, etc.) and run it directly on the GOLDELOX processor embedded in the µOLED-128-G1 module. The rich set of built in library functions and the high level syntax allows the user to take complete control of all available hardware resources such as the Serial Port, Graphics Display, micro-SD card, I/O pins, etc. This eliminates the need for an external host micro-controller to drive the µOLED-128-G1 module via serial commands. It provides the user complete independence to quickly develop powerful applications.

Features

128 x 128 resolution, 65K true to life colours, PMOLED screen.

1.5” diagonal size, 45.5 x 33.5 x 6.3mm. Active Area: 27mm x 27mm.
No backlighting with near 180° viewing angle.
Easy 5 pin interface to any host device: VCC, TX, RX, GND, RESET
Voltage supply from 3.6V to 6.0V, current @40mA nominal when using a 5.0V supply.
Serial RS-232 (0V to 3.3V) with auto-baud feature (300 to 256K baud). Rx line has built in series current limit resistor and a pull-up resistor.
Powered by the 4D Labs GOLDELOX processor (also available as separate OEM IC for volume users).
2 different operating platforms; the Serial Command platform (factory default) or the 4DGL (4D Graphics Language) platform.
Optional USB to Serial interface via the 4D micro-USB (µUSB-MB5 or µUSB-CE5) modules.
Onboard micro-SD (µSD) memory card adaptor for storing of icons, images, animations, etc. 64Mb to 2Gig µSD memory cards can be purchased separately.
Rich set of built in graphics commands and functions.

Support:

Visit the 4D Systems Discussion Forum

Accessories:

uUSB-MB5

uUSB-CE5